-
-
-
News & Events
-
Road marking equipment
HW-618 Passenger cold spray marking machine
618 passenger marking machine is a practical multi-functional standard mechanical marking equipment that is turned by turbine rollers. The equipment itself can be replaced according to the needs of users, such as the system, paint cylinder and other parts, to achieve hot melt extrusion coating, hot melting point coating, hot melt oscillation, two-component shake and scraping, two-component point coating, cold spray and other multi-function marking.
In order to facilitate the convenience and labor saving of the marking construction, in addition to the marking equipment itself, auxiliary accessories and equipment with the construction, there are some auxiliary accessories and tools. Why walk when you can ride? Booster car and marking machine link construction only need to control the pedal forward and backward, convenient and fast.
HW- Booster Vehicle (Electric)
In order to facilitate the convenience and labor saving of the marking construction, in addition to the marking equipment itself, auxiliary accessories and equipment with the construction, there are some auxiliary accessories and tools. Why walk when you can ride? Booster car and marking machine link construction only need to control the pedal forward and backward, convenient and fast.
Waterline car is a necessary auxiliary software for road marking engineering. The product can be up to 9 meters wide, and 3 reference lines can be placed at the same time, which minimizes the manual payout time and improves the construction efficiency.
HW- High pressure road air cleaning machine
It can clean the cement slurry, mud and floating soil on the road surface, and can also be used for cold paint marking. The cleaning force can be adjusted to enhance the adhesion between the marking line and the ground.
The machine is hot melt, cold paint marking construction auxiliary equipment, mainly used in the road marking construction before the cleaning work, using gasoline engine as power, drive the fan inside the high pressure impeller rotation, produce strong wind pressure, the road impurities, dust clean; The body is equipped with the bottom oil barrel placement rack, which can synchronously complete the cleaning and painting of the bottom oil work, saving time and labor, improving work efficiency, and usually used with road sweeper.
Bottom oil blower is an auxiliary equipment for hot melt marking construction. The machine uses imported Honda engine as power to drive the rotation of the high pressure impeller in the fan to produce strong wind pressure, clean the impurities and dust on the road surface, and spray with automatic air compressor device.
The thermostatic box can maintain a constant temperature of 350-550° for a long time
Primer is the adhesive material used when coating the road marking with hot melt paint, primer plays the role of preventing the coating film from peeling off, improving the adhesion of the coating film and road surface, primer car is the auxiliary equipment for the construction of hot melt marking line, the machine uses gasoline engine as the power, with automatic air compressor device for spraying, improve the work efficiency, reduce labor intensity, The use of no noise, no pollution, spray gun frame guide rod lifting design, adjust the spray width accurately, convenient, with simple operation, maintenance, long service life and so on.
HW-D390 Marking and dewiring machine
D390 marking wire removal machine is a better mechanical wire removal machine, the characteristics of the machine is barrier-free, large power to ensure construction efficiency, imported super alloy special blade, long service life; The maximum efficiency of daily line removal can reach 1200 square meters, minimize road wear, easy maintenance, etc.
HW-1050 Hot melt old wire cleaning machine
1050 hot melt old line cleaning machine is used to remove damage, crack, discoloration and other old hot melt line special equipment. The grinding head is driven by the engine to rotate at high speed, and the grinding head is run in with the raised part of the road under the action of rotating centrifugal force to clean the old line.
HW-900 Hot melt cold paint dual purpose old wire cleaning machine
900 hot melt cold paint dual-purpose old line cleaning machine design concept and manufacturing process first-class, its principle is plane centripetal force knocking grinding. The tool head is active on the tool shaft, and the centripetal force is generated by high-speed rotation, and the tool head punching is removed from the marking surface to achieve the purpose of removal.
HW-23CX Marking And Dewiring Machine（With dust recycling）
HW-23CX marking and removing machine is the best machine in the history of mechanical removing machine, which is characterized by low failure rate, high efficiency, no need to replace bearings, good road grinding effect, easy maintenance and so on. The machine has various tool head modes, which can meet the requirements of various road surfaces.