PRODUCTS
Road marking equipment

Road marking equipment

HW-168 Ride on Hot Melt Marking Vehicle

HW-168 Ride on Hot Melt Marking Vehicle

The 168 ride on hot melt marking vehicle is a practical and multifunctional marking equipment. The equipment itself has a high degree of automation, a high safety factor, reduces the labor intensity of operators, and improves the efficiency of marking construction. The device itself can achieve multifunctional marking such as hot melt oscillation and hot melt scraping by replacing components such as systems and paint tanks according to user needs.

View Details

HW- High pressure water stripping car

HW- High pressure water stripping car

The high pressure water stripping vehicle uses ultra-high pressure water jet technology to clean the road surface, and the removal of glue can be fully controlled from the cab. Special components such as high pressure water pump are integrated and installed in the protective cover, which can be easily separated from the vehicle. A uniquely designed turbine blade is installed on the robot arm to effectively recycle waste water, rubber, paint, etc. The cyclone vortex recyles the waste into the recycling tank at the same time, cleans the road surface after removing the glue twice, and can handle the ordinary vehicle license plate and inspect according to the regulations.

View Details

HW- High pressure water glue remover

HW- High pressure water glue remover

Chassis truck, 270 horsepower, national six emission standard

View Details

HW-880 Fine hand-pushed hot melt marking machine

HW-880 Fine hand-pushed hot melt marking machine

The exclusive deep die, all-steel structure and tool-free replacement design system make the equipment better and stronger.

View Details

HW-860 Hand push hot melt machine

HW-860 Hand push hot melt machine

860 square box hot melt integrated machine, on the basis of the marking machine, upgrade the furnace and barrel to make it have hot melt kettle burning function, easy to use, fast and flexible. Suitable for residential areas, schools, factories, parking lots and other areas, is the first choice for small projects and new entrants.

View Details

HW-860 Advanced hand-pushed box hot melt marking machine

HW-860 Advanced hand-pushed box hot melt marking machine

The 860 square box hot melt integrated machine, based on the marking machine, upgrades the furnace and material bucket to simultaneously have the function of hot melt kettle burning, making it easy, fast, and flexible to use. Suitable for residential areas, schools, factories, parking lots, and other areas, it is the preferred solution for small projects and new entrants.

View Details

HW-320 Electric hot melt marking machine

HW-320 Electric hot melt marking machine

Electric hot melt marking machine is the key equipment of hot melt marking line construction, by combining with hot melt kettle to complete the marking line construction, electric hot melt marking machine adopts electric energy saving power system, which can reduce the labor intensity of construction personnel, simple operation, stable performance, beautiful marking line, widely favored.

View Details

HW-4021 Hand push high-pressure airless cold spray marking machine

HW-4021 Hand push high-pressure airless cold spray marking machine

Single gun maximum 150-300mm

View Details

HW-7025 Hand push high-pressure airless cold spray marking machine

HW-7025 Hand push high-pressure airless cold spray marking machine

Single gun maximum 150-300mm, dual gun 50-600mm

View Details

HW- Hand-pushed two-component shake and scrape machine

HW- Hand-pushed two-component shake and scrape machine

Two-component oscillating, flapping and scraping multifunctional integrated marking machine is a special machine for the construction of two-component marking machine. This self-propelled equipment can meet the functions of two-component oscillating, spinning, scraping, multi-functional one-machine three-purpose scribing, can be used to construct a variety of forms of two-component marking such as ribs, spinning, scraping, ordinary, etc.

View Details

HW- Hand-push type two-component scraping scribing machine

HW- Hand-push type two-component scraping scribing machine

The company's two-component machine introduced in Germany advanced technology, greatly improve the construction efficiency of the mixing system using mechanical transmission electronic clutch, floor knife can adapt to different road conditions, glass bead spreader with speed buffer device, performance of two-component construction quality, fast speed, flexible operation and easy maintenance characteristics. The macromolecular network structure formed by cross-linking reaction has dense, full surface, good anti-fouling, good weather resistance (no cracking in winter, no softening in summer), and excellent self-cleaning property.

View Details

HW- Hand-pushed two-component dot coating marking machine

HW- Hand-pushed two-component dot coating marking machine

The two-component point coating line is not easy to deform under high temperature in summer, and it is not easy to fall off under low temperature in winter.

View Details

HW- Hand push 150 coating machine

HW- Hand push 150 coating machine

The small 150 coating machine is a special equipment for two-component zebra crossing marking. This equipment can adjust the rotating speed of the spinning rod at any time according to the different viscosity of the paint, to meet the construction needs of various complex conditions to the maximum extent.

View Details

HW-18L Trolley carrying dual-purpose cold jet marking machine

HW-18L Trolley carrying dual-purpose cold jet marking machine

The machine uses gasoline engine to drive a single plunger pump, the paint is formed in the machine high pressure spraying, so the marking thickness is uniform Angle, the spray gun frame guide rod lifting design, adjust the spray width accurate and convenient, with low labor intensity, fast and convenient construction. ☆ Can be modified into the car (Note: the car can be optional computer break controller)

View Details

HW-18L-2 Double cylinder double pump cold paint truck marking machine

HW-18L-2 Double cylinder double pump cold paint truck marking machine

Car cold spray marking machine is a special equipment for large highway projects, suitable for highways, airports to draw solid lines, dotted lines, double yellow lines cold spray and other cold paint marking. The equipment is equipped with two guns that can take over the moving flat spray gun and two paint barrels that can spray different colors of paint at the same time.

View Details

HW-9L Hand-pushed high pressure non-air cooled jet marking machine

HW-9L Hand-pushed high pressure non-air cooled jet marking machine

9L cold spray is the fastest hand-pushed marking equipment in the construction of Haiwei Maixin marking machine, suitable for construction in various harsh environments, especially the powerful hydraulic system escorts the cold spray construction. Aluminum hydraulic oil tank outer wall with aluminum heat sink, heat dissipation effect is good; The main configuration is imported with original, whether it is quality or efficiency can be compared with the machine imported with original.

View Details

< 12345 >

Contact

Welcome to leave a message, we will reply to you as soon as possible

Please inform us about your individual requirements

How many lines (single, double and triple lines) should be marked in one operation?
Should profiled markings be used?
Should be marked with two different colors?
Are glass beads used for post-reflection?
Which marking material should be used?
Send
%{tishi_zhanwei}%

Contact

Phone: +86 19802598888
Email: fuhao@heavstymarking.com

Address: No. 618, Shangdang North Wind Port, Dantu District, Zhenjiang City, Jiangsu Province
Postal Code: 212121

View More →

Quick links

hot products

Products

Cases

Service

News & Events

About Us

Contact Us

Products

HW-660 multi-fonction thermoplastic spray marking machine

HW Hand push two-component spraying machine (Wagner pump external mixing)

HW Pre-Marking Robot

HW- vehicle-mounted two-component dot coating marking machine

HW-660 multi-function extrusion frame marking car

HW- Self-propelled hot melt spraying marking machine

Message

Welcome to leave a message, we will reply to you as soon as possible

SUBMIT

Copyright © 2024 Heavsty Transportation Technology Co.,Ltd

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.

These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.

These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.

These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.

Business license

Powered by 300.CN  |  Tags